Submissions

Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in LaTeX file format.
  • Where available, URLs for the references have been provided.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.

Author Guidelines

Please:

  1. Read the Focus & Scope to gain an overview and assess if your manuscript is suitable for this journal.
  2. Use the LaTeX template to prepare your manuscript, you can download article templates from journal article template page. (Note that the journal accepts any form of LaTex).
  3. Make sure that issues about publication ethics, copyright, authorship, figure formats, data, and references format have been appropriately considered, please see editorial policies and publishing polcies.
  4. Ensure that all authors have approved the content of the submitted manuscript.
  5. Ensure that the submitted Manuscript should neither be published previously nor be under consideration for publication in another journal.
  6. Authors who have insurmountable difficulties that preclude web submission should contact jmam@sabapub.com

Manuscript Submission Overview

Types of Publications

JMAM has no restrictions on the length of manuscripts, provided that the text is concise and comprehensive. Full experimental details must be provided so that the results can be reproduced. JMAM requires that authors publish all experimental controls and make full datasets available where possible.

Manuscripts submitted to this journal should neither be published previously nor be under consideration for publication in another journal. The main article types are as follows:

  • Articles: Original research manuscripts. The journal considers all original research manuscripts provided that the work reports scientifically sound experiments and provides a substantial amount of new information. Authors should not unnecessarily divide their work into several related manuscripts, although Short Communications of preliminary, but significant, results will be considered. Quality and impact of the study will be considered during peer review.
  • Reviews: These provide concise and precise updates on the latest progress made in a given area of research. Systematic reviews should follow the PRISMA guidelines.

Submission Process

Manuscripts for JMAM should be submitted online at submission website. The submitting author, who is generally the corresponding author, is responsible for the manuscript during the submission and peer-review process. The submitting author must ensure that all eligible co-authors have been included in the author list and that they have all read and approved the submitted version of the manuscript. To submit your manuscript, register and log in to the submission website. Once you have registered, click here to go to the submission form. All co-authors can see the manuscript details in the submission system, if they register and log in using the e-mail address provided during manuscript submission.

Accepted File Formats

Authors must use the LaTeX template to prepare their manuscripts. Using the template file will substantially shorten the time to complete copy-editing and publication of accepted manuscripts. The total amount of data for all files must not exceed 100 MB. If this is a problem, please contact the Editorial Office jmam@sabapub.com.

Accepted file formats are:

  • LaTeX: Manuscripts prepared in LaTeX must be collated into one ZIP folder (including all source files and images, so that the Editorial Office can recompile the submitted PDF). When preparing manuscripts in LaTeX, please use the SABA LaTeX template files.
  • Supplementary files: Maybe any format, but it is recommended that you use common, non-proprietary formats where possible 

Manuscript Preparation

Research manuscripts should comprise:

  • Front matter: Title, Author list, Affiliations, Abstract, Keywords
  • Research manuscript sections: Introduction, Results, Discussion, literature review, Materials and Methods, Conclusions.
  • Back matter: Supplementary Materials, Acknowledgments, Author Contributions, Conflicts of Interest, References.

Front Matter

These sections should appear in all manuscript types

  • Title: The title of your manuscript should be concise, specific, and relevant. It should identify if the study reports (human or animal) trial data, or is a systematic review, meta-analysis, or replication study.
  • Author List and Affiliations: Authors' full first and last names must be provided. The initials of any middle names can be added. The PubMed/MEDLINE standard format is used for affiliations: complete address information including city, zip code, state/province, and country. At least one author should be designated as the corresponding author, and his or her email address should be included at the footnote.
  • Abstract: The abstract should be a total of about 300 words maximum. The abstract should be a single paragraph and should follow the style of structured abstracts but without headings: 1) Background: Place the question addressed in a broad context and highlight the purpose of the study; 2) Methods: Describe briefly the main methods or treatments applied. Include any relevant preregistration numbers, and species and strains of any animals used. 3) Results: Summarize the article's main findings, and 4) Conclusion: Indicate the main conclusions or interpretations. The abstract should be an objective representation of the article: it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions.
  • Keywords: Three to five pertinent keywords need to be added after the abstract. We recommend that the keywords are specific to the article, yet reasonably common within the subject discipline.

Research Manuscript Sections

  • Introduction: The introduction should briefly place the study in a broad context and highlight why it is important. It should define the purpose of the work and its significance, including specific hypotheses being tested. The current state of the research field should be reviewed carefully and key publications cited. Please highlight controversial and diverging hypotheses when necessary. Finally, briefly mention the main aim of the work and highlight the main conclusions. Keep the introduction comprehensible to scientists working outside the topic of the paper.
  • Literature Review: This section is dedicated to the significant literature resources that contributed to the research. The author should survey scholarly articles, books, and other sources relevant to the area of research, providing a description, summary, and critical evaluation of each work.

  • Materials and Methods: They should be described with sufficient detail to allow others to replicate and build on published results. New methods and protocols should be described in detail while well-established methods can be briefly described and appropriately cited. Give the name and version of any software used and make clear whether the computer code used is available. Include any pre-registration codes.

  • Results: Provide a concise and precise description of the experimental results, their interpretation as well as the experimental conclusions that can be drawn.
  • Discussion: Authors should discuss the results and how they can be interpreted from the perspective of previous studies and of the working hypotheses. The findings and their implications should be discussed in the broadest context possible and the limitations of the work highlighted. Future research directions may also be mentioned. This section may be combined with Results.
  • Conclusions: The author should clearly explain the important conclusions of the research highlighting its significance and relevance. This section can be added to the manuscript if the discussion is unusually long or complex.
  • Patents: This section is not mandatory, but may be added if there are patents resulting from the work reported in this manuscript.

Back Matter

  • Supplementary Materials: Describe any supplementary material published online alongside the manuscript (figure, tables, video, spreadsheets, etc.). Please indicate the name and title of each element as follows Figure S1: title, Table S1: title, etc.
  • Acknowledgments: All sources of funding of the study should be disclosed. Clearly indicate grants that you have received in support of your research work and if you received funds to cover publication costs. Note that some funders will not refund article processing charges (APC) if the funder and grant number are not clearly and correctly identified in the paper. Funding information can be entered separately into the submission system by the authors during the submission of their manuscripts. Such funding information, if available, will be deposited to FundRef if the manuscript is finally published.
  • Author Contributions: Each author is expected to have made substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data; or the creation of new software used in the work; or have drafted the work or substantively revised it; AND has approved the submitted version (and version substantially edited by journal staff that involves the author’s contribution to the study); AND agrees to be personally accountable for the author’s own contributions and for ensuring that questions related to the accuracy or integrity of any part of the work, even ones in which the author was not personally involved, are appropriately investigated, resolved, and documented in the literature.
    For research articles with several authors, a short paragraph specifying their individual contributions must be provided. The following statements should be used "Conceptualization, X.X. and Y.Y.; Methodology, X.X.; Software, X.X.; Validation, X.X., Y.Y. and Z.Z.; Formal Analysis, X.X.; Investigation, X.X.; Resources, X.X.; Data Curation, X.X.; Writing – Original Draft Preparation, X.X.; Writing – Review & Editing, X.X.; Visualization, X.X.; Supervision, X.X.; Project Administration, X.X.; Funding Acquisition, Y.Y.”.
  • Conflicts of Interest: Authors must identify and declare any personal circumstances or interest that may be perceived as inappropriately influencing the representation or interpretation of reported research results. If there is no conflict of interest, please state "The authors declare no conflict of interest." Any role of the funding sponsors in the design of the study; in the collection, analyses or interpretation of data; in the writing of the manuscript, or in the decision to publish the results must be declared in this section. If there is no role, please state “The founding sponsors had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, and in the decision to publish the results”.
  • References: References must be numbered in order of appearance in the text (including table captions and figure legends) and listed individually at the end of the manuscript. We recommend preparing the references with a bibliography software package, such as EndNoteReferenceManager or Zotero to avoid typing mistakes and duplicated references. We encourage citations to data, computer code and other citable research material. If available online, you may use reference style 9. below.
  • Citations and References in Supplementary files are permitted provided that they also appear in the main text and in the reference list.
  • Please download article template to see the reference style that you should follow.
  • A typical reference to an article in a journal would be like:

    [1] Abdo MS, Ibrahim AG and Panchal SK (2019). Nonlinear implicit fractional differential equation involving ψ-Caputo fractional derivative. Proc. Jangjeon Math. Soc. 22 (3): 387-400 doi:10.17777/pjms2019.22.3.387

    A reference to a book would be on the following lines:

    [2] Kilbas AA, Srivastava HM and Trujillo JJ (2006). Theory and Applications of Fractional Differential Equations. North-Holland Math Stud, Elsevier, Amsterdam.

Articles

Section default policy

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.